Friday, December 26, 2008
I burned a LOT of glue this month; a local boutique has some of my ornaments, hearts, bells, gingerbread boys, snowmen. We'll see how they do. *tries not to bounce in chair, lol*
I have a crafting partner now too; we took our crafts to the boutique together and are looking for more places. *waves hello to you!*
Wednesday, December 3, 2008
...like this fig, or these leaves. I forgot to take pics before I glued the fig together, so I will show you with a leaf. Oh, notice the wire fig-shaped framework? If you are using paper bags for this craft, you need a shaped wire like that for the bigger pieces. Since I am using chipboard (which doesn't flop about once you put glue on it), I had to use a wire right down the midddle, though; chipboard *doesn't* mold itself around wire and the framework showed very dramatically. I was surprised the center wire worked!
Make sure you have mirror images.
Bend the wire just a little to be more "leaf-like" if you wish. (The fig wire was not bent.)
Get out your fancy glue palette. *grin* Notice the lil ball of dried glue near the stem? It made wonderful texture when I was ready to glue the fig.
Spread some on and stick everything together. Line up the edges as best you can.
I think they look like little curtain rods with finials... okay, back to the fig. Now that it is glued together and dried, spread a generous coating of glue on both sides. This is messy; quite honestly, it works best for me if I spread the glue with my fingers. I made use of that lil ball of dried glue to put in some texture lines. Then, while the glue was still wet (it gives the best texture to do this with wet glue), I lit a taper candle and ran the fig through the tip of the flame. It sizzled, it crackled, it burned, it made smoke... and it made soot, oh yeah baby!
A good beginning....
You can stop here; the cardboard underneath will show through those light spots. I chose to keep burning, keep painting with flame and soot, until the fig was truly black from it.
It doesn't show very much, but the fig itself did catch fire and I had to repeatedly shake it back out. This is part and parcel of glue burning. Sometimes the glue catches fire, sometimes the paper bag or chipboard box beneath it catches fire. You can minimize it by being certain that you get a good coating of glue on all edges, but a burnt edge is actually good.
If you are using paper, your ornament may very well droop terribly as you burn the glue. Not to worry--just turn it over and burn the other side. As it starts to droop, flip it again, and repeat until you've burnt the ornament as much as you like.
Be sure you use a tall taper, so you don't automatically have to hunch over to see what you're doing. That way pain lies, lol...
Now it's time to wipe the soot off. I used that most high-tech of inventions: a wadded paper towel. Here, tis easy to see on the leaf.
See the contrast? The leaf is fully wiped off and the fig hasn't been started yet.
Ahhh, there we go, wiped off on both sides.
Next step: cut the wire to size and file the end smooth. I used an inexpensive jewelry file for this, because it was small and easy for me to control.
Bend a loop to be the hook. (The "drawing" is actually some of those wadded and well-used paper towels--YOU know, the high tech soot remover gadget.)
Follow the pics....
Now that the soot is wiped off the hook--and the "stem" is darker from being burnt twice--tis time to paint. The colors I chose were Metallic Amethyst, Metallic Pure Gold, and Metallic Copper. I dabbed them on and then smeared them around with my high tech painting tool, one color at a time at first and then multiple colors at a time, until I liked the way they looked.
Remember to paint the hook too. Notice fancy pants high tech painting tool at upper left. *grin*
Finished! This fig went to the person who inspired it, my friend who owns an antique store called... Fig. *grin*